If you’re like me, you’ve been there before. You go to unlock your door, but your key gets stuck in the lock. If only you had known how to get a broken key out of a lock before this happened! But don’t worry – I’m here to help. This guide will teach you how to remove a broken key from a lock, so you can get back into your home or office as quickly as possible.


Locked out of your home or car? Trying to get a broken key out of a lock can be frustrating and time-consuming


It’s easy to become frustrated when you’re locked out of your home or car, especially if you don’t know what to do. You may end up trying to force the key in the wrong way, which can damage the lock and make the problem worse.


Killeen Locksmith Pros is here to help. We have put together a guide on how to get a broken key out of a lock, with step-by-step instructions on how to fix the problem quickly and easily.


FAQS About Broken Key Extraction


Can a locksmith repair a broken key?

Yes, a locksmith can repair a broken key. Depending on the extent of the damage, they may be able to file down and reshape the blade or replace the entire key. If you have an old or antique lock with an unusual shape, a locksmith might also be able to create a new key from scratch by taking measurements of the existing key.


In general, it’s best to take your broken key and lock to a locksmith as soon as possible in order to avoid any further damage or security issues. With their knowledge and experience, they can help you find the best solution for your specific situation.


What is broken key extraction?

Broken key extraction is the process of removing a broken piece of key from the lock. It requires special tools and techniques to carefully remove pieces without causing damage to the lock. This process can be done by locksmiths or experienced DIYers, depending on the level of difficulty.


What are the signs that my key is broken?

The most common signs of a broken key are difficulty turning it in the lock, an inability to remove it from the lock after unlocking, and visible pieces or fragments of the key in the lock. If the key is stuck in the lock, try lubricating it with graphite powder or WD-40.


If that does not work, then you may need to call a locksmith for assistance. Additionally, if there are any jagged edges on your key or pieces that have broken off, you should consider getting a replacement key made as soon as possible.


A broken key can be hazardous and cause issues with the locking mechanism, leading to a security breach. It is always best to replace worn or damaged keys as soon as possible.



How can I prevent having to get my key extracted?

Taking proper care of your keys can help prevent having to get them extracted. Make sure to only use the correct key for the lock and avoid forcing it, as this will cause damage to both the lock and key. If you feel any resistance when turning the key in the lock, stop immediately and contact a locksmith.


Will get my key extracted damage my lock?

In most cases, no. However, there is always a risk of damaging the lock when performing any type of repair or maintenance. If you are concerned about damaging your lock, it is best to contact a professional locksmith to have them extract the broken key. They will have the right tools and knowledge to safely remove it without causing further damage.



How long does broken key extraction take?

The time it takes to perform a broken key extraction varies depending on how much of the key is still in the lock and if there are any other issues with the lock or key. Generally, the process should take no more than 30 minutes. However, if the lock or key is severely damaged it could take longer.


How much does broken key extraction cost?

The cost of a broken key extraction service varies depending on the locksmith and location. It is best to contact a few locksmiths in your area to compare prices. In most cases, the cost will be between $50 and $100.


Can I extract the broken key myself?

It is possible to extract the broken key yourself, but it requires special tools and knowledge. If you are not experienced with lock repair or maintenance, it is best to contact a professional locksmith. They will have the right tools and knowledge to safely remove the broken key without causing further damage.


What To Do If You Have A Broken Key And Can’t Get It Out Of The Lock

If you have ever broken a key while trying to unlock a door, you know how frustrating it can be. The broken key creates a barrier between you and the door, leaving you stranded on either side.

Many people assume that the only way to fix a broken key is to call a locksmith.


However, there are some things you can do before resorting to professional help.

If the broken key is only partially inserted into the lock, you may be able to remove it with needle-nose pliers or a paperclip.


If the broken key is completely inside the lock, you will need a broken key extractor. This tool is specifically designed to grip and remove broken keys from locks. You can purchase a broken key extractor online or at a hardware store.


Once you have the broken key out of the lock, take it to a locksmith or hardware store so they can make a copy for you. In the meantime, consider replacing your old lock with a new one that is less likely to break keys.


How To Avoid Breaking Your Key In The First Place

We’ve all been there – you’re trying to unlock your door, and suddenly your key snaps in half. It’s a frustrating feeling, especially if you’re in a hurry. But before you reach for the phone to call a locksmith, there are a few things you can do to try and fix the problem.


First, try wiggling the broken key out of the lock. If it’s purely the key that’s broken and not the lock itself, this should be relatively easy to do. If the key is stuck fast, however, don’t force it – this will only make the problem worse.


Once you’ve removed the key, take a close look at the door lock. If it’s damaged, then it’s likely that your key broke because of this. In this case, you’ll need to call a locksmith to have the lock repaired or replaced. However, if the lock looks fine, then the problem is probably with your key.


There are a few ways to fix a broken key, but by far the easiest is to use a broken key extraction tool. This is a specialized tool that can be bought relatively cheaply from most hardware stores. Once you have one of these, simply insert it into the lock and twist – this should allow you to remove the broken key without damaging the lock itself.


If you don’t want to buy a tool, or if none of these methods work, then your only option is to call a locksmith. They will be able to extract the key and make sure that your door lock is working properly again.


 What To Do If You Break Your Key In The Lock

There are a few different ways that you can break your key in the lock cylinder. The most common way is by using too much force when trying to insert the key into the lock. This can cause the key head to snap off, leaving the rest of the key stuck in the lock.


Another way that keys can break is if they are old and brittle. In this case, the key may break into several pieces when you try to insert it into the lock.


If you find yourself in this situation, don’t panic. There are a few things that you can do to remove the broken key from the lock cylinder. The first thing that you’ll need to do is assess the situation.

If there is only a small piece of the key remaining in the lock, you may be able to remove it with a pair of needle nose pliers.


However, if the majority of the key is still stuck in the lock, you’ll need to take more drastic measures.


One option is to use a saw blade to cut through the key. This will allow you to remove the broken key from the lock cylinder without damaging the lock itself. Another option is to call a locksmith and have them come out and remove the broken key for you.


This is usually the best option if you’re not comfortable removing the broken key yourself. No matter what method you choose, be sure to take care when removing the broken key so that you don’t damage the lock cylinder.


How To Remove A Broken Key From A Lock

One of the most frustrating things that can happen is when you go to unlock your door and your key breaks in the lock. Not only is it difficult to remove broken keys from a lock, but it can also be costly to have a locksmith come and fix the problem.


However, there are a few simple steps that you can follow to remove a broken key from a lock. First, try to insert a small flathead screwdriver into the keyway and apply pressure to the broken key.


Next, use a set of needle-nose pliers to pick up the broken key and pull it out of the lock. If these methods do not work, you may have to disassemble the lock itself in order to remove the broken key.


While this may seem like a daunting task, removing a broken key from a lock is actually fairly simple if you know what you are doing. With a little patience and some basic tools, you should be able to get your door unlocked in no time.


Tips For Preventing And Dealing With Locksmith Emergencies

It’s always a good idea to have a plan for dealing with locksmith emergencies. After all, keys can break, door locks can malfunction, and you may even accidentally lock your keys inside your car or house. If you find yourself in one of these situations, don’t panic. There are a few simple steps you can take to resolve the problem.


If your keys break, try to locate the key blade or fragment that is still intact. This will make it easier for a professional locksmith to create a new key for you. If your keys are locked inside your car or house, call a locksmith and explain the situation. They will be able to assist you in safely gaining entry to your property.


And if you’re ever locked out of your car, don’t attempt to break in. This could damage your vehicle and void your insurance policy. Instead, call a tow truck and have them take you to a nearby locksmith. With these tips in mind, you’ll be prepared for any locksmith emergency that comes your way.



If you find yourself in a bind with a broken key, don’t worry. With a little patience and the right tools, you can get that key out of the lock and be on your way. Follow the steps we outlined above and you’ll have that key removed in no time.


Locked out of your house or car?


Killeen Locksmith Pros is here to help with our experience and expertise. We know how to get broken keys out of locks quickly, without damaging them – so you can get back into your home or car. Plus, we have tips for preventing future key breakage.


Lost keys need not be a headache anymore! With the professionals at Killeen Locksmith Pros, you won’t worry about being locked out again. Even better, our years of knowledge and experience also mean that even if worse comes to worst and a key does break in a lock – it’ll only take us minutes to fix up the problem quickly and effectively.


Read our step-by-step guide on getting a broken key out from any type of lock today! And if all else fails – give us a call at (254) 307-7675 and we’ll come right away!









Pin It on Pinterest